ABBUC e.V. Forum

pancio

Correct, But if you'll connect directly to monitor out you will have so dark/not-synchronized picture, moreover you need to have power for scandoubler, so best method is to drop modulator from Atari then place scandoubler and additional miniHDMI socket in hole after TV modulator. Two video signals a...

pancio

Hi! I've very busy last time so need to read tons of article on Abbuc's forum.. but before I start this I would like to show you how to connect Atari to any TV using HDTV cable... I spend a few hours on research in order to find cheap and proper scandoubler... I found RGBS2HDMI device which works ve...

pancio

Mathy hat geschrieben: ↑
04.04.2024 14:43
.
Hello Pancio

I hope the software can be/will be compiled for use with the Mac too.

Sincerely

Mathy

PS will you show this at the Fujiama 2024?

Library and main program is wrote in GCC, so if this compiler is available on Mac... so answer is yes :-)

pancio

I bought one for tests... Do you know it's possible to use it with Atari* e.g. with USB2DB9 interface like Tom?

BR,
pancio

pancio

Hi Erhard, I've two 3.5" FDD based on XF551. Both are powered by 5V only. If you will have access to your equipment/schematic. We may compare these... unfortunately I sent my devices to colleague which is making 3D enclosure for me.. but it's not so big problem - he may take photos and give oth...

pancio

MC for 1090 done!

Unfortunately I haven't ready 1090 board (still in development) to test it....

BR,

pancio

Hi, I've opened a few projects on my desk but I'm slowly catching up. Yesterday evening I finished MIDIcar Vertical which is successor for older version. I'm using XL mezzanine as base for MCV. Enclosure will be made soon. Of course - all details, schematics, PCBs design and gerbers you may find on ...

pancio

I'm not sure... The idea is to use mscIDE as is (without firmware modification) and connect to SSD/NVMe/FLASHDISK/SD device using IDE2SATA or IDE2NVME interface. At this moment we don't know it's possible but if mezzanine interfaces are full compatible with IDE standard - it should be possible to ha...

pancio

Die Folie in EEPROM Keine Daten werden verdampfen :-) Diese beiden anderen Erinnerungen wurden zu ordnungsgemäß gereinigten RAM hinzugefügt (verschiedene Zugangszeiten, die OS ordnungsgemäß reinigen, die RAM beim Start ordnungsgemäß reinigen). Oder sie wurden einfach ersetzt, weil die vorherigen Sch...

pancio

I love connecting various things to Atari and especially what I didn't have in the 90s. e.g. HDD. Together with FloppyDoc and GBXL we have been working on reactivating the mscIDE project for some time. The plan has cooperation either with SSD SATA or with NvME (by a dedicated adapter). It got stuck ...

pancio

I have both type, angled and straight connectors. I may say these to you bub I'm afraid delivery cost will be higher than direct order. I bought these on:

https://de.aliexpress.com/item/10050036 ... pt=glo2pol

BR,
pancio

pancio

Hi,

I'll check "my stock" after work!

BR,

pancio

Thank you for notice. I tried to use standard components as usually. We will see soon, PCB is under production. In mid time, my colleague KKRYS is working on front panel design - to avoid damage the original one.

pancio

Great, Thank you Erhard for confirmation. I checked schematic and PCB delivered by Wolfram... it's look perfectly! The issues which I found earlier are not existing on provided design. Please look on attached pictures. Just cosmetic changes on my side were made :-) What I'm changed: - added capacito...

pancio

Regarding The!Cart: You are not forgotten Pancio,...

Ehlo! just provide mi the data :-)

BR,
pancio

pancio

Thank you so much for files. I'll use these files as reference as well as from Guus and Hias source. I was little bit surprised when I saw 9572 on PCB-layout but doubt was solved quickly during discussion with FlopyDoc. Do you remember why you changed 9572 to 95144? Was logic array too small? I'm as...

pancio

Es gibt diese Regelmäßigkeit... die durch mehrere Fälle bestätigt wird. Wenn der Computer in HonKong hergestellt wurde, waren alle mit Sockeln für alle Systeme ausgestattet. Die in Taiwan hergestellten Modelle hatten Sockel für einige der Hauptsysteme, und am Ende der 800XL-Ära gab es Sockel nur noc...

pancio

Sprechen Sie über die Tribünen? Ich habe noch keinen gefunden, aber ich habe drei davon ...

Der Atari 800XE wurde von Atari als letztes 8-Bit-Modell hergestellt. Die meisten von ihnen gingen nach Osteuropa, wo sie dann bei allem Geld sparten.

BR,

pancio

Is possible to use pin header like this? (and use original socket from 6507)

BR,

pancio

Ich weiß nicht, wie viel Sie bezahlen möchten, aber sehen Sie hier:

https://www.kleinanzeigen.de/s-anzeige/ ... 2-279-1396

Ich habe von diesem Freund eine Menge Atari-Ausrüstung mitgenommen und es war immer in Ordnung. Sie können verhandeln :-)

pancio

A few components production was discontinued e.g. XC95144XL-TQ100 or SOIP-32 SRAM but these are still available on the market. I changed high speed diode from PMLL4153 to LL4148 because it's cheaper and easy to buy and has very similar electrical ratings. There is no one component which are not avai...

pancio

Pretty finished... Looks like the original, but I added a few modifications and rerouted some wires. Changed outlines to be compatible with standard KiCAD, added one capacitor under SRAM... It should be 1:1 compatible with the original PCB as I tried to have almost the same component positions. Whil...

pancio

Piotr Bugaj aka "zaxon" does very interesting things, but sometimes without barriers, like the author's property, and sometimes on the Atari forum, especially in Poland, we have a kind of war because of unethical practices... I don't like it... I usually ask authors before making a replica...

pancio

I want to do it myself with cooperation with authors and friendly contributors, not for commercial... I've no access to this part of FB - probably it's closed group... :-(

pancio

Moin, nachdem ich ja lange Zeit im Atari Bereich "offline" war konnte ich nun feststellen, daß es gerade im Bereich CARTs ziemlich viele Neuerungen gibt. Ich möchte mal fragen: Welche Vor- und Nachteile haben welche Carts? Beim THE!CART weiss ich es, es ist die langsame Übertragung per At...

pancio

Hi,

I'm not sure it's easy. Any software stored in the ROM should be patched, and probably software dedicated to Atari as well. I imagine each firmware running independently on each other... I'm just wondering because I don't think I can do it.

BR,
pancio

pancio

Good idea! I'll propose some new variant soon :-)

BR,

pancio

Hi Erhard, You have totally right. I didn't realize that shown encoders is hard coded and chosen value is represent by DEC/HEX state on PINs.. We need to have steps information with C.W nad C.C.W direction... I ordered a few encoders to check which will be best for project... At this moment I decide...

pancio

Has existing one from Knitter additional switch on knob?
I found a few smaller 0.9cm x 0.9cm encoders:

: encoder2.png (181.62 KiB) 562 mal betrachtet

: encoder3.png (195.94 KiB) 562 mal betrachtet

: encoder1.png (186.08 KiB) 562 mal betrachtet

pancio

Hi Mathy,

I'm during refreshing PCB for megaspeedy so it's time to come up with alternatives to the smaller selector. Do you have something in mind?

Many thanks to Erhard for very constructive advices and help!

BR,

pancio

(McBazel) Scart and HDMI to HDMI converter (metal box): - HDMI converter and scandoubler - input: Scart (no S-Video!), HDMI - output: HDMI with separate audio via 3,5mm jack (TV says RGB, 50Hz or 60Hz) - switches: a) NTSC or PAL, b) 720P or 1080 P, c) Scart or HDMI - resolution: 1280x720 (Scart inp...

pancio

Thank You, Erhard.

Will in touch.

pancio

Hi, (translated) In so einem Fall würde ich MegaSpeedy vielleicht selbst bauen... Von wem kann ich Informationen zum Bau bekommen? Wurden unterschiedliche Versionen von XILINX verwendet? Ich besitze: EPM7064SLC44-10N EPM7128SLC64 XC95144XL XC9572 XC9572XL Die restlichen Komponenten sind kein Problem...

pancio

Hi,

I prepared MIDIcar version for 1090XL extension. If we have almost one user in UE which is interested to test it I'll order PCB for it... Source files are available on my page.

BR,
pancio

pancio

Du hast recht... aber ich habe mehrere unvollendete Projekte (z. B. MSC-IDE wartet noch auf die Fertigstellung) auf meinem Schreibtisch und möchte eines Tages gerne mit meinem Atari mit Diskettenlaufwerk spielen :-)

BR,
pancio

pancio

Vielen Dank für Ihren Vorschlag, aber ich möchte mehr als ein Turbomodul testen, daher ist Mega Speedy der beste Kandidat :-)

RB,
pancio

pancio

Hat jemand MegaSpeeds für Atari 1050 zu verkaufen? Zusammengebaut oder Selbstmontage.

BR,
pancio

pancio

There is answer to rest question from Pmetzen's post: https://abbuc.de/forum/viewtopic.php?p=20555#p20555 Dann hat man kontakt Probleme. Beim MidiCar könnte es auch nützlich sein wer eine Synth Karte nutzt einen Reset an der Synth Karte durch zu führen, wenn Midiklänge plötzlich merkwürdig klingen. ...

pancio

Just quick comment (will be explained later - I'm going to work)... MC might be discovered "by accident" - sometime it works, sometime not. MC6850 hasn't special register or ID, so program trying to find something connected on $D1 or $D5 page. Unfortunately not always work properly. It not...

pancio

Thanks for your answer. It's okay for me. I can assemble it myself.

BR,
pancio

Die Suche ergab 186 Treffer