Ich habe in Assembler ein Regenbogenlogo auf der Grundlage des ABBUC-Logos erstellt.
Ursprünglich wollte ich dies als ANTIC MODE 7-Grafik machen, um effizient zu sein, aber das war nicht möglich. Vielleicht kann das jemand?
Quelle auf Github: https://github.com/tschak909/abbuc-logo
Binärdatei im Anhang zu diesem Beitrag.
Viel Spaß,
-Thom
---
I have made a rainbow logo based on the ABBUC logo, in assembler.
I wanted initially to do this as an ANTIC MODE 7 graphic, to be efficient, but was unable to. Maybe someone can?
Source on Github: https://github.com/tschak909/abbuc-logo
Binary attached to this post.
Enjoy,
-Thom
ABBUC-Logo mit Quellcode
Moderator: Rockford
-
- Beiträge: 203
- Registriert: 17.08.2021 00:22
- Has thanked: 4 times
- Been thanked: 145 times
- Kontaktdaten:
Re: ABBUC-Logo mit Quellcode
Ich dachte, ich könnte es besser machen...
Ich habe das Logo als Zeichensatz neu implementiert. logo2.xex
und dann ein Musterbuch erstellt, das den Zeichensatz als Modus 6, Modus 7 und Modus 2 zeigt. logo3.xex
Die Ergebnisse sind an der gleichen Stelle auf github zu finden, und die Veröffentlichung wurde geändert.
Hoffentlich ist das nützlich.
-Thom
Die README enthält alle Informationen, die zur Verwendung des Zeichensatzes erforderlich sind.
---
I felt I could do better, so...
I re-implemented the logo as a character set. logo2.xex
and then made a specimen book showing the character set rendered as mode 6, mode 7, and mode 2. logo3.xex
The results, are in the same place on github, and the release has been amended.
Hopefully this is useful.
-Thom
The README contains all the info needed to use the character set.
Ich habe das Logo als Zeichensatz neu implementiert. logo2.xex
und dann ein Musterbuch erstellt, das den Zeichensatz als Modus 6, Modus 7 und Modus 2 zeigt. logo3.xex
Die Ergebnisse sind an der gleichen Stelle auf github zu finden, und die Veröffentlichung wurde geändert.
Hoffentlich ist das nützlich.
-Thom
Die README enthält alle Informationen, die zur Verwendung des Zeichensatzes erforderlich sind.
---
I felt I could do better, so...
I re-implemented the logo as a character set. logo2.xex
and then made a specimen book showing the character set rendered as mode 6, mode 7, and mode 2. logo3.xex
The results, are in the same place on github, and the release has been amended.
Hopefully this is useful.
-Thom
The README contains all the info needed to use the character set.
- Dateianhänge
-
- logo3.xex
- (1.36 KiB) 38-mal heruntergeladen
-
- logo2.xex
- (1.21 KiB) 40-mal heruntergeladen
-
- README.txt
- (924 Bytes) 42-mal heruntergeladen
Wer ist online?
Mitglieder in diesem Forum: 0 Mitglieder und 0 Gäste